N06075 & 2.4951 Nickel-Chromium Alloy Round bar
2022-11-18 08:34:40 Origin： Remark：0 Click：
UNS N06075 (W-Nr 2.4951 & 2.4630) is an 80% Nickel- 20% Chromium Base Austenitic type Steel controlled additions of titanium and carbon. N06075 offers a medium strength at high operating temperatures, it is used in gas turbine, furnace components.
RAW MATERIAL SPECIFICATIONS - Grade N06075 & 2.4951 & 2.4630
MATERIAL CATEGORY: Nickel-chromium based superalloy
EX-STOCK & INVENTORY - Round bar diam. 50mm / 70mm / 85mm
MATERIAL SPECIFICATIONS - 2.4951, N06075
CHEMICAL COMPOSITION (mass Weight %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.015
Chromium, Cr (％): 18.0 ~ 21.0
Nickel, Ni (％): Balance
Titanium, Ti (％): 0.20 ~ 0.60
Aluminum, Al (％): -
Others (%): Co ≤2.00, Cu ≤0.50, Fe ≤5.00
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Condition: heat treatment
Tensile strength, σb/MPa: 850 Min.
Yield strength, σ0.2≥/MPa: 365
Elongation, δ5≥(％): 5.0
Reduction of area, ψ≥(％): -
Hardness ≥: -
TYPICAL APPLICATIONS
Driveshafts and Gears, Fasteners.
Landing and takeoff gear, Missile and ejector systems, Torsion springs.
The alloy has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 1500ºF (815ºC).
Used for gas-turbine components (blades, rings, discs), bolts, tube supports in nuclear generators, exhaust valves in internal combustion engines.
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 300mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
MATERIAL CATEGORY: Nickel-chromium based superalloy
EX-STOCK & INVENTORY - Round bar diam. 50mm / 70mm / 85mm
MATERIAL SPECIFICATIONS - 2.4951, N06075
CHEMICAL COMPOSITION (mass Weight %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.015
Chromium, Cr (％): 18.0 ~ 21.0
Nickel, Ni (％): Balance
Titanium, Ti (％): 0.20 ~ 0.60
Aluminum, Al (％): -
Others (%): Co ≤2.00, Cu ≤0.50, Fe ≤5.00
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Condition: heat treatment
Tensile strength, σb/MPa: 850 Min.
Yield strength, σ0.2≥/MPa: 365
Elongation, δ5≥(％): 5.0
Reduction of area, ψ≥(％): -
Hardness ≥: -
TYPICAL APPLICATIONS
Driveshafts and Gears, Fasteners.
Landing and takeoff gear, Missile and ejector systems, Torsion springs.
The alloy has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 1500ºF (815ºC).
Used for gas-turbine components (blades, rings, discs), bolts, tube supports in nuclear generators, exhaust valves in internal combustion engines.
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 300mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
Hot search：N06075 & 2.4951 & 2.4630 round bar flat bar
Previous page：Nimonic 75
Last page：55CrNiMoVS4-2-4
Total list
Monthly rank
- 15SAE 30302 / AMS 5636 Corrosion-Resistant Steel
- 61.4935 / X20CrMoWV12-1 Round bar, Flat bar
- 6MSRR 6503 - MSRR 6514 Martensitic Steel Bars
- 5Free machining Steel AMS 5642 & S34720
- 4AMS 5678 - S17700 Aged hardening Steel Bar
- 4FV520B / FV520 Martensitic Stainless Steel
- 41.4938 / X12CrNiMoV12-3 / Z12CNDV12 ESR Steel
- 3AMS 5508 & S41800 Heat Resistant Steel
- 3S42226 & 422Cb Martensitic Steels
- 3AMS 5645 / S32100 ESR Quality Austenitic Steel