X1CrNiMoAlTi12-10-2
2014-12-16 11:21:50 Origin: Remark:0 Click:
Specifications X1CrNiMoAlTi12-10-2 Datasheet, X1CrNiMoAlTi12-10-2 Chemical, X1CrNiMoAlTi12-10-2 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade X1CrNiMoAlTi12-10-2
STEEL TYPE - Precipitation hardening series
MATERIAL SPECIFICATIONS - BS EN 10083-3 (2005)
CHEMICAL COMPOSITION (WEIGHT %)
C (%): ≤ 0.015
Si (%): ≤ 0.10
Mn (%): ≤ 0.10
P (%)≤: 0.010
S (%)≤: 0.005
Cr (%): 11.0 ~ 12.5
Ni (%): 9.20 ~ 10.2
Mo (%): 1.85 ~ 2.15
Ti (%): 0.27 ~ 0.40
Si (%): ≤ 0.10
Mn (%): ≤ 0.10
P (%)≤: 0.010
S (%)≤: 0.005
Cr (%): 11.0 ~ 12.5
Ni (%): 9.20 ~ 10.2
Mo (%): 1.85 ~ 2.15
Ti (%): 0.27 ~ 0.40
Al (%): 0.80 ~ 1.10
Others (%): N ≤ 0.020
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Thickness/≤mm: 1.50
Condition of thermal treatment: + AT (Solution treatment)
Hardness ≤HBS: 363
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(%): -
Elongation δ(transversal )≥(%): -
Impact absorbing power Akv≥/J : -
Hardness ≤HBS: 363
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(%): -
Elongation δ(transversal )≥(%): -
Impact absorbing power Akv≥/J : -
Condition of thermal treatment: P1400
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1300
Tensile strength σb/MPa: ≤1400
Elongation δ ≥(%): 9
Impact absorbing power Akv≥/J: 50
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1300
Tensile strength σb/MPa: ≤1400
Elongation δ ≥(%): 9
Impact absorbing power Akv≥/J: 50
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
FORMS & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 300mm X W70 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 400mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 400mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Hot search:X1CrNiMoAlTi12-10-2
Previous page:X1CrNiMoAlTi12-10-2
Last page:X8CrMnCuNB17-8-3
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1