1.4713
2014-12-19 14:36:47 Origin： Remark：0 Click：
EN 10095 Specifications 1.4713 Round bar, Flat bar, Plate and Forgings 1.4713 ESR, Hot forging, Hot rolling, Heat treatment, Cold working.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade DIN 1.4713
MATERIAL CATEGORY - Heat resisting steel and Nickel base alloy
MATERIAL SPECIFICATIONS - EN 10095 (1999)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.12
Silicon, Si (％): 0.50 ~ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 6.00 ~ 8.00
Nickel, Ni (％): -
Aluminum, Al (％): 0.50 ~ 1.00
Silicon, Si (％): 0.50 ~ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 6.00 ~ 8.00
Nickel, Ni (％): -
Aluminum, Al (％): 0.50 ~ 1.00
HEAT TREATMENT AND MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Hardness ≤HBW: 192
Hot working temperature /℃: 1100~800
Heat treatment temperature /℃: 780~840
Heat treatment temperature /℃: 780~840
Heat treatment temperature /℃|solution treatment: -
|Condition: + annealed
Tensile strength, |σb≥/MPa: 420～620
Yield strength, |σ0.2≥/MPa: 220
Elongation, |δ5(％)≥: 20.0
|Condition: + annealed
Tensile strength, |σb≥/MPa: 420～620
Yield strength, |σ0.2≥/MPa: 220
Elongation, |δ5(％)≥: 20.0
MELTING PROCESS
Heat resistant steel is generally smelt in electric arc furnace (EAF ) or induction furnace + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining and external refining.
Heat resistant steel is generally smelt in electric arc furnace (EAF ) or induction furnace + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining and external refining.
FORMS AND DIMENSIONS
Round bar / Disc (diameter1): 5.5mm to 650mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter1): 5.5mm to 650mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 300mm X W60 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 4mm X W100 - 750mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com
Sheet steel via cold rolled: T0.5 - 4mm X W100 - 750mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com
Hot search：1.4713
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1