1.4986
2024-11-12 11:01:00 Origin： Remark：0 Click：
Austenitic Stainless Steel 1.4986 Shaft, Inventory 1.4986 Round bar, Forgings 1.4986 Stock properties ESR, Hot forging, rolling, heat treatment
TECHNICAL DATA SHEET - Heat Resisting Steel - X7CrNiMoBNb16-16 & 1.4986
MATERIAL CATEGORY: Austenitic creep-resisting steels
FEATURES AND CLASSIFICATIONS
Heat-resistant steel means one type of steel possesses inoxidizability, enough high-temperature strength and excellent heat-resistant quality under high temperature. Heat resistant steel is divided into oxidation resistant steel and refractory steel according to its performance. Further into Austenitic heat-resistant steel, Martensitic heat-resistant steel, Ferritic heat-resistant steel and Pearlitic heat-resistant steel according to its normalizing.
Heat-resistant steel means one type of steel possesses inoxidizability, enough high-temperature strength and excellent heat-resistant quality under high temperature. Heat resistant steel is divided into oxidation resistant steel and refractory steel according to its performance. Further into Austenitic heat-resistant steel, Martensitic heat-resistant steel, Ferritic heat-resistant steel and Pearlitic heat-resistant steel according to its normalizing.
MATERIAL SPECIFICATIONS - DIN 17442,17744, DIN EN 10302, 10095, EN 10088-1 (2005)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.04 ~ 0.10
Silicon, Si (％): 0.30 ~ 0.60
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％) ≤: 0.045
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 15.5 ~ 17.5
Nickel, Ni (％): 15.5 ~ 17.5
Molybdenum, Mo (％): 1.60 ~ 2.00
Carbon, C (％): 0.04 ~ 0.10
Silicon, Si (％): 0.30 ~ 0.60
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％) ≤: 0.045
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 15.5 ~ 17.5
Nickel, Ni (％): 15.5 ~ 17.5
Molybdenum, Mo (％): 1.60 ~ 2.00
Nitrogen, N (%): -
Aluminium, Al (%): -
Other(％): 10×C％ ≤ Nb+Ta ≤ 1.20, Boron, B (%) 0.05 ~ 0.10
Other(％): 10×C％ ≤ Nb+Ta ≤ 1.20, Boron, B (%) 0.05 ~ 0.10
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: solution treatment
Tensile strength, σb / MPa: 650~850
Condition: solution treatment
Tensile strength, σb / MPa: 650~850
Yield strength, σs ≥ MPa: 500
Elongation, δ5 ≥ (％): 16.0
Elongation, δ5 ≥ (％): 16.0
Non-scale temperature in Air: 750℃
APPLICATION FIELD
Heat-resistant steel is widely used in the field of manufacturing the boiler, steam turbine, motive power machine, industrial furnace, and other mechanical parts of aviation, petrochemical engineering operating at high temperature. Those parts must hold the features: high temperature strength, resistance to high temperature oxide etch, enough toughness, excellent machinability, weldability, structure stability based on different usages.
Heat-resistant steel is widely used in the field of manufacturing the boiler, steam turbine, motive power machine, industrial furnace, and other mechanical parts of aviation, petrochemical engineering operating at high temperature. Those parts must hold the features: high temperature strength, resistance to high temperature oxide etch, enough toughness, excellent machinability, weldability, structure stability based on different usages.
PROFILE & DIMENSION
Round bar / rod disc (diameter): 6.0mm to 850mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / rod disc (diameter): 6.0mm to 850mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
MANUFACTURING TECHNOLOGY - SMELTING
Heat resistant steel is generally smelt in electric arc furnace or induction furnace. For higher quality,it should be smelt via technology of vacuum refining and external refining.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
Heat resistant steel is generally smelt in electric arc furnace or induction furnace. For higher quality,it should be smelt via technology of vacuum refining and external refining.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
Hot search：1.4986
Previous page：X7CrNiMoBNb16-16
Last page：X8CrCoNiMo10-6
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1