S41041
2015-02-18 13:12:00 Origin： Remark：0 Click：
Stocklist S41041 Datasheet, Suppliers S41041 Chemical, Inventory S41041 Ring forging, Bar, Wire rod - steelmaking, ESR, Blooming, Forging, Rolling, Heat treat Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
Material Specifications - ASTM A565
TECHNICAL DATA SHEET - UNS S41041
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - High content chromium round bar and forge piece
MATERIAL SPECIFICATIONS - ASTM A565
CHEMICAL COMPOSITION ( MASS WEIGHT %)
C (％): 0.13 ~ 0.18
Si (％): ≤ 0.50
Mn (％): 0.40 ~ 0.60
P (％)≤: 0.030
S (％)≤: 0.030
Cr (％): 11.5 ~ 13.0
Ni (％): ≤ 0.50
Mo (％): ≤ 0.20
Nb (％): 0.15 ~ 0.45
Si (％): ≤ 0.50
Mn (％): 0.40 ~ 0.60
P (％)≤: 0.030
S (％)≤: 0.030
Cr (％): 11.5 ~ 13.0
Ni (％): ≤ 0.50
Mo (％): ≤ 0.20
Nb (％): 0.15 ~ 0.45
Al (%): ≤ 0.05
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of heat treatment: HT 1136℃~1163℃, ≥677℃ X 2h tempered
Tensile strength, σb ≥/MPa: 795
Yield strength, σ0.2 ≥/MPa: 515
Yield strength, σ0.2 ≥/MPa: 515
Elontation, δ ≥(％): 15.0
Reduction of area, ф ≥(％): 50.0
Hardness | HRS: ≤277
Reduction of area, ф ≥(％): 50.0
Hardness | HRS: ≤277
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Automobile parts, exhaust pipe
Electronics
Turbine motor blade
Bolt and nut
Bolt and nut
Valve body
Pressure vessel
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：S41041
Previous page：ASTM A565 Gr.S64152
Last page：S41425
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1