X120Mn13
2015-02-28 14:22:11 Origin： Remark：0 Click：
Specifications X120Mn13 Suppliers, X120Mn13 Chemical, X120Mn13 Ring forging Bar Wire rod, DIN X120Mn13 Sheet - steelmaking, ESR, Hot forging, Rolling, Heat treatment,
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATASHEET - X120Mn13
MATERIAL CATEGORY: Non-magnetic stainless steel and alloy
MATERIAL SPECIFICATIONS: DIN SEW 390 (1991)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 1.10 ~ 1.30
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 11.5 ~ 13.5
Phosphorus, P (％) ≤: 0.060
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): ≤ 0.50
Nickel, Ni (％): -
Molybdenum, Mo (％): -
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 11.5 ~ 13.5
Phosphorus, P (％) ≤: 0.060
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): ≤ 0.50
Nickel, Ni (％): -
Molybdenum, Mo (％): -
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1100~750℃
Quenching or solution treatment temperature: 1000~1100℃
Tensile strength, σb≥ /MPa: 590
Yield strength, σ0.2 ≥/MPa: 295
Elongation, δ≥(％): 25.0
Impact strength, Akv ≥/J: -
Yield strength, σ0.2 ≥/MPa: 295
Elongation, δ≥(％): 25.0
Impact strength, Akv ≥/J: -
TYPICAL APPLICATIONS
High-voltage electrical apparatus, bolts and nuts
Transformer tank
Generator
Preparation equipments
Electronics
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
FORMS & DIMENSIONS
Round bar / Wire rod / Disc (diameter): 5.5 ~ 400mm
Square bar / Flat bar: 6 ~ 650mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod / Disc (diameter): 5.5 ~ 400mm
Square bar / Flat bar: 6 ~ 650mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1200mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 4mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：X120Mn13
Previous page：A693 S46500
Last page：1.3802
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1