1.3813 Stockist, 1.3813 Equivalent Steel

1.3813
2024-10-17 03:24:00   Origin:   Remark:0 Click:

DIN SEW 390 (1991) Material Specification 1.3813 (X40MnCrN19), Non-magnetic steel, 1.3813 Round bar, flat bar, plate and hollow bar processing
 

OFFICIAL TEST CERTIFICATE: issued by TUV - SGSBV


TECHNICAL DATASHEET - W-Nr 1.3813
MATERIAL CATEGORY - Non-magnetic
stainless steel and alloy
MATERIAL SPECIFICATIONS - DIN SEW 390 (1991)

 

CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (%): 0.30 ~ 0.50
Silicon, Si (%): ≤ 0.80
Manganese, Mn (%): 18.0 ~ 20.0
Phosphorus, P (%)≤: 0.060
Sulfur, S (%)≤: 0.030
Chromium, Cr (%): 3.00 ~ 5.00
Nickel, Ni (%): -
Molybdenim, Mo (%): -
Nitrogen, N (%): 0.08 ~ 0.12

 

HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1050 ~ 850℃
Quenching or solution treatment temperature: 1000 ~ 1050℃
Tensile strength, Rm ≥ MPa: 740 ~ 930
Yield strength, Rp0.2 ≥ MPa: 295
Elongation, 5A ≥ (%): 45.0
Impact strength, Akv ≥ J: 124

 

TYPICAL APPLICATIONS
High-voltage electrical apparatus, bolts and nuts.
Transformer tank, Generator ring, Preparation equipments, Electronics.

 

PRODUCT MELTING PROCESS
Alloy Steel 1.3813 is usually produced by AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment.

 

FORMS & DIMENSIONS
Round bar & Rod & Disc (diameter): 5.5mm to 600mm
Square bar / flat bar: 10mm to 800mm
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.

 

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (
sales@ccsteels.com) our resident team of qualified production engineers.

Hot search:1.3813

Previous page:X40MnCrN19
Last page:ASTM A289

Share to: