1.3819
2024-12-02 13:56:00 Origin： Remark：0 Click：
Non-magnetic stainless steel 1.3819 Round bar, Forgings, Flat bar 1.3819 hot rolling, Heat treatment, Ultrasonic test, Cold worked
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - 1.3819
MATERIAL SPECIFICATIONS - DIN SEW 390 (1991)
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.40 ~ 0.60
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 19.0 ~ 21.0
Phosphorus, P (％)≤: 0.100
Sulfur, S (％)≤: 0.030
Chromiun, Cr (％): 13.0 ~ 15.0
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 19.0 ~ 21.0
Phosphorus, P (％)≤: 0.100
Sulfur, S (％)≤: 0.030
Chromiun, Cr (％): 13.0 ~ 15.0
Nickel, Ni (％): -
Molybdenum, Mo (％): -
Vanadium, V (％): 1.00 ~ 1.50
Molybdenum, Mo (％): -
Vanadium, V (％): 1.00 ~ 1.50
Nitrogen, N (%): 0.15 ~ 0.35
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1150~1000℃
Quenching or solution treatment temperature: 1130~1170℃
Tensile strength, Rm ≥ MPa: 880 ~ 1080
Yield strength, Rp0.2 ≥ MPa: 490
Elongation, 5A ≥ (％): 40.0
Impact strength, Akv ≥/J: 103 (transversal value)
Yield strength, Rp0.2 ≥ MPa: 490
Elongation, 5A ≥ (％): 40.0
Impact strength, Akv ≥/J: 103 (transversal value)
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 300mm X W600 ~ 600mm X L1000 ~ 3000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
TYPICAL APPLICATIONS
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
High-voltage electrical apparatus, bolts and nuts, Transformer tank.
Generator, Preparation equipments, Electronics.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment.
The alloy is usually produced by AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search：1.3819
Previous page：X50MnCrV20-14
Last page：X2CrNiMnMoNNb21-15-7-3
Total list
Monthly rank
- 48ASTM A565 Gr.616HT
- 44Z15CN17-03
- 30AISI 306
- 27P550
- 25X12CrMoWVNbN10-1-1
- 24X10CrNiW17-13-3
- 22SAE 51420
- 20ASTM A565 Grade 616
- 20X120Mn13
- 20EN 58B