1.3968
2015-03-09 09:15:24 Origin： Remark：0 Click：
Non-magnetic Stainless Steel 1.3968 Specification Stocklist 1.3968 Round bar, Flat bar - Steelmaking, ESR, Hot Forging, Hot rolling, Heat treatment
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
RAW MATERIAL DATASHEET - W-Nr 1.3968
MATERIAL SPECIFICATIONS - DIN SEW 390 (1991)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.15
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 17.0 ~ 18.00
Phosphorus, P (％) ≤: 0.080
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 11.0 ~ 13.0
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 17.0 ~ 18.00
Phosphorus, P (％) ≤: 0.080
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 11.0 ~ 13.0
Nickel, Ni (％): 1.50 ~ 2.50
Molybdenum, Mo (％): 0.30 ~ 0.80
Molybdenum, Mo (％): 0.30 ~ 0.80
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1050 ~ 850℃
Quenching or solution treatment temperature: 1000 ~ 1050℃
Tensile strength, Rm ≥ MPa: 540 ~ 780
Yield strength, Rp0.2 ≥ MPa: 295
Elongation, A5 ≥ (％): 45.0
Yield strength, Rp0.2 ≥ MPa: 295
Elongation, A5 ≥ (％): 45.0
Imapct, Akv ≥/J: 137
TYPICAL APPLICATIONS
High-voltage electrical apparatus, bolts and nuts.
Transformer tank, Generator.
Preparation equipments, Electronics.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / Quenched and tempered.
The alloy is usually produced by AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / Quenched and tempered.
FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 550mm
Round bar (Diameter): 5.5mm to 550mm
Wire rod (Diameter): 5.5mm to 13mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Forging piece: stepped shafts, and other different shapes based on OEM.
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email sales@ccsteels.com
Hot search：1.3968
Previous page：X12MnCr18-12
Last page：X2CrNiMnMoNNb23-17-6-3
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1