BS X5CrNiMoCuNb14-5
2015-03-21 14:40:02 Origin： Remark：0 Click：
Precipitation hardening martensitic steel X5CrNiMoCuNb14-5 Round bar, Inventory X5CrNiMoCuNb14-5 Forgings 1.4594 Flat bar, ESR ingot Stock Available
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - BS X5CrNiMoCuNb14-5
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Precipitation Hardening Series - Round bar Diam. 30 ~ 150mm, ESR ingot Stock
MATERIAL SPECIFICATIONS - BS EN 10083-3 (2005)
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.07
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 13.0 ~ 15.0
Nickel, Ni (％): 5.00 ~ 6.00
Molybdenum, Mo (％): 1.20 ~ 2.00
Copper, Cu (％): 1.20～2.00
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 13.0 ~ 15.0
Nickel, Ni (％): 5.00 ~ 6.00
Molybdenum, Mo (％): 1.20 ~ 2.00
Copper, Cu (％): 1.20～2.00
Others (%): Nb + Ta 0.15 ~ 0.60
MECHANICAL PROPERTIES UNDER DIFFERENT HEAT TREATMENT CONDITIONS
Thickness/≤mm: 100
Condition of thermal treatment: AT (Solution treatment)
Hardness ≤HBS: 360
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J : -
Hardness ≤HBS: 360
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J : -
Condition of thermal treatment: P930
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 720
Tensile strength σb/MPa: 930~1100
Elongation δ ≥(％): 15
Impact absorbing power Akv≥/J : 40
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 720
Tensile strength σb/MPa: 930~1100
Elongation δ ≥(％): 15
Impact absorbing power Akv≥/J : 40
Condition of thermal treatment: P1000
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 860
Tensile strength σb/MPa: 1000~1200
Elongation δ ≥(％): 10
Impact absorbing power Akv≥/J : -
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 860
Tensile strength σb/MPa: 1000~1200
Elongation δ ≥(％): 10
Impact absorbing power Akv≥/J : -
Condition of thermal treatment: P1070
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1000
Tensile strength σb/MPa: 1070~1270
Elongation δ ≥(％): 10
Impact absorbing power Akv≥/J : -
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1000
Tensile strength σb/MPa: 1070~1270
Elongation δ ≥(％): 10
Impact absorbing power Akv≥/J : -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged
AVAILABLE PROFILE & DIMENSIONS
Round bar / Disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 6 ~ 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 6 ~ 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 300mm X L1000 - 3000mm or in coil
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 300mm X L1000 - 3000mm or in coil
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：BS X5CrNiMoCuNb14-5
Previous page：BS EN 1.4568
Last page：FV520B
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1