BS 1.4530
2015-03-23 16:52:05 Origin： Remark：0 Click：
Specifications 1.4530 datasheet, 1.4530 Chemical, Ring forging, EN 1.4530 Bar, Wire rod, Sheet - steelmaking, ESR, Blooming, Forging, Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
Technical Standards - BS EN 10088-3 (2005) or by agreement.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - BS 1.4530
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Precipitation hardening series
MATERIAL SPECIFICATIONS: BS EN 10083-3 (2005)
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.015
Si (％): ≤ 0.10
Mn (％): ≤ 0.10
P (％)≤: 0.010
S (％)≤: 0.005
Cr (％): 11.0 ~ 12.5
Ni (％): 8.50 ~ 9.50
Mo (％): 1.85 ~ 2.15
Other (％): Ti 0.27 ~ 0.37, Al 0.60 ~ 0.80, N ≤ 0.010
Si (％): ≤ 0.10
Mn (％): ≤ 0.10
P (％)≤: 0.010
S (％)≤: 0.005
Cr (％): 11.0 ~ 12.5
Ni (％): 8.50 ~ 9.50
Mo (％): 1.85 ~ 2.15
Other (％): Ti 0.27 ~ 0.37, Al 0.60 ~ 0.80, N ≤ 0.010
MECHANICAL PROPERTIES UNDER HEAT TREATMENT CONDITIONS
Thickness/≤mm: 150
Condition of thermal treatment: AT (Solution treatment)
Hardness ≤HBS: 363
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J : -
Hardness ≤HBS: 363
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J : -
Condition of thermal treatment: P1200
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1100
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): 12
Impact absorbing power Akv≥/J : 90
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1100
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): 12
Impact absorbing power Akv≥/J : 90
PRECIPITATION HARDENING STAINLESS STEEL / APPLICATION
Primary structures are austenite or martensite, which possess high strength, corrosion resistance, oxidation resistance and superior hot working performance.
The popular steel grades of Precipitation hardening-stainless steel are BS X5CrNiCuNb16-4, BS X7CrNiAl17-7, BS 1.4568, BS X5CrNiMoCuNb14-5,17-4PH, S17400, ASTM 630, SUS630, STS630, which are normally through precipitation hardening (also known as age-hardening) treatment practice.
Those materials are widely used in manufacturing the high strength, anti-corrosive forge piece for planes, gas turbine and other machined parts.
PRODUCT DESCRIPTIONThe alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
PRODUCT PROFILE & AVAILABLE
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 300mm X W100 - 1200mm X L1000 - 5000mm
Sheet steel via cold rolled: T1.0 - 6mm X W100- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3mm X W10 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T1.0 - 6mm X W100- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.5 - 3mm X W10 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Previous page：X1CrNiMoAlTi12-9-2
Last page：BS X1CrNiMoAlTi12-10-2
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1