BS X1CrNiMoAlTi12-10-2
2015-03-23 16:53:10 Origin： Remark：0 Click：
BS EN Precipitation hardening stainless steel material specification X1CrNiMoAlTi12-10-2 datasheet, Chemical, Ring forging,BS X1CrNiMoAlTi12-10-2 Bar, Wire rod, Sheet - steelmaking, ESR, Blooming, Forging, Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
Technical Standards - BS EN 10088-3 (2005) or by agreement.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION / DATASHEET - BS X1CrNiMoAlTi12-10-2 /1.4596
MATERIAL CATEGORY: Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE: Precipitation hardening series
MATERIAL SPECIFICATIONS: BS EN 10083-3 (2005)
CHEMICAL COMPOSITION (WEIGHT %)
C(％): ≤0.015
Si(％): ≤0.10
Mn(％): ≤0.10
P(％)≤: 0.010
S(％)≤: 0.005
Cr(％): 11.0～12.5
Ni(％): 9.20～10.2
Mo(％): 1.85~2.15
Other(％): Ti0.27～0.40,Al0.80~1.10,N≤0.020
Si(％): ≤0.10
Mn(％): ≤0.10
P(％)≤: 0.010
S(％)≤: 0.005
Cr(％): 11.0～12.5
Ni(％): 9.20～10.2
Mo(％): 1.85~2.15
Other(％): Ti0.27～0.40,Al0.80~1.10,N≤0.020
MECHANICAL PROPERTIES ( BAR/WIRE ROD ) BASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS
Thickness/≤mm: 1.50
Condition of thermal treatment: AT (Solution treatment)
Hardness ≤HBS: 363
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J : -
Hardness ≤HBS: 363
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤1200
Elongation δ ≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J : -
Condition of thermal treatment: P1400
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1300
Tensile strength σb/MPa: ≤1400
Elongation δ ≥(％): 9
Impact absorbing power Akv≥/J: 50
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 1300
Tensile strength σb/MPa: ≤1400
Elongation δ ≥(％): 9
Impact absorbing power Akv≥/J: 50
PRECIPITATION HARDENING STAINLESS STEEL / APPLICATION
Primary structures are austenite or martensite, which possess high strength, corrosion resistance, oxidation resistance and superior hot working performance.
The popular steel grades of Precipitation hardening-stainless steel are BS X5CrNiCuNb16-4, BS X7CrNiAl17-7, BS 1.4568, BS X5CrNiMoCuNb14-5,17-4PH, S17400, ASTM 630, SUS630, STS630, which are normally through precipitation hardening (also known as age-hardening) treatment practice.
Those materials are widely used in manufacturing the high strength, anti-corrosive forge piece for planes, gas turbine and other machined parts.
PRODUCT DESCRIPTIONThe alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Mr Chen, Mr.Jiang - Email: lh.steel@hotmail.com
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Mr Chen, Mr.Jiang - Email: lh.steel@hotmail.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Hot search：BS X1CrNiMoAlTi12-10-2
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1