EN 1.4762
2015-05-05 09:58:00 Origin： Remark：0 Click：
BS EN 10095 (1999) Specification 1.4762 Round bar, flat bar, plate hot Forging, Rolling, 1.4762 Heat treatment, Straightened, Ultrasonic test, Cold working, Machined.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - EN 1.4762
MATERIAL CATEGORY: Heat resisting steel and Nickel base alloy
MATERIAL SPECIFICATIONS: BS EN 10095 (1999)
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): ≤ 0.12
Silicon, Si (％): 0.70 ~ 1.40
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.015
Chromium, Cr (％): 23.0 ~ 26.0
Nickel, Ni (％): -
Aluminum, Al (％): 1.20 ~ 1.70
Silicon, Si (％): 0.70 ~ 1.40
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.015
Chromium, Cr (％): 23.0 ~ 26.0
Nickel, Ni (％): -
Aluminum, Al (％): 1.20 ~ 1.70
HEAT TREATMENT AND MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Hardness ≤HBW: 223
Hot working temperature /℃: 1100~800
Heat treatment temperature /℃: 800~860
Heat treatment temperature /℃: 800~860
Heat treatment temperature /℃|solution treatment: -
|Condition: annealed
|σb≥/MPa: 520～720
|σ0.2≥/MPa: 280
|δ5(％)≥: 10
|Condition: annealed
|σb≥/MPa: 520～720
|σ0.2≥/MPa: 280
|δ5(％)≥: 10
MELTING PROCESS
Heat resistant steel is generally smelt in electric arc furnace (EAF ) or induction furnace + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining and external refining.
Heat resistant steel is generally smelt in electric arc furnace (EAF ) or induction furnace + Electroslag remelting (ESR). For a purpose of higher quality, it should be smelt via technology of vacuum refining and external refining.
PRODUCT APPLICATION
Heat resisting steel is widely used in the field of manufacturing the boiler, steam turbine, motive power machine, industrial furnace, and other mechanical parts of aviation, petrochemical engineering operating at high temperature. Those parts must hold the features: high temperature strength, resistance to high temperature oxide etch, enough toughness, excellent machinability, weldability, structure stability based on different usages.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Heat resisting steel is widely used in the field of manufacturing the boiler, steam turbine, motive power machine, industrial furnace, and other mechanical parts of aviation, petrochemical engineering operating at high temperature. Those parts must hold the features: high temperature strength, resistance to high temperature oxide etch, enough toughness, excellent machinability, weldability, structure stability based on different usages.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter1): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter1): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Forging piece: stepped shafts, other different shapes based on OEM.
Previous page：BS X10CrAlSi25
Last page：BS X10NiCrAlTi32-21
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1