XM-1
2024-10-16 10:31:00 Origin： Remark：0 Click：
Material Specification Corrosion Resistant Steel XM-1 Round bar, flat bar, plate S20300 forgings Stock Available XM-1 Heat treatment
MATERIAL DATA SHEET: XM-1 & S20300
MATERIAL CATEGORY: 17Cr-6Ni - 6Mn Austenitic steel
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright condition.
Final heat treatment - solution treatment.
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 5.00～6.50
Phosphorus, P (％) ≤: 0.04
Sulfur, S (％) ≤: 0.18～0.35
Chromium, Cr (％): 16.0～18.0
Nickel, Ni (％): 5.00～6.50
Molybdenum, Mo (％): ≤ 0.50
Copper, Cu (％): 1.75 ~ 2.25
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 5.00～6.50
Phosphorus, P (％) ≤: 0.04
Sulfur, S (％) ≤: 0.18～0.35
Chromium, Cr (％): 16.0～18.0
Nickel, Ni (％): 5.00～6.50
Molybdenum, Mo (％): ≤ 0.50
Copper, Cu (％): 1.75 ~ 2.25
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Form: wire, strip
Tensile strength, Rm / MPa: 655
Yield strength, Rp0.2 / MPa: 330
Elongation, δ5, (％): -
Reduction of area, Z (％): -
Elongation, δ5, (％): -
Reduction of area, Z (％): -
Hardness (HBW): -
Hardness | HRB: -
Cold bending property: N
TYPICAL APPLICATIONS
Chemical equipments and pats.
Mechanical parts used in the condition of corrosion resistance
Bolt and nuts, Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL us or call our resident team of qualified production engineers, Email: sales@ccsteels.com
PRODUCT PROFILE & DIMENSION
Round bar / rod / disc (diameter): 5.50mm to 700mm
Square bar / Flat bar: 8mm to 650mm
Plate / Sheet steel / Steel strip: 0.6mm to 200mm
Width: 8mm to 1200mm
Forged steel shape: stepped shafts, other different shapes based on OEM.
Pipes / Tubings: OD 30 - 1200 mm, with wall thickness ranging from 10 to 350 mm.
Hot search： XM-1
Previous page：UNS S20200
Last page：S20300
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1