1Mn18Cr18N
2015-05-22 10:06:01 Origin: Remark:0 Click:
Material specification 1Mn18Cr18N datasheet, 1Mn18Cr18N Chemical,1Mn18Cr18N Ring forging,Bar, Wire rod, Sheet - steelmaking, ESR, Blooming, 1Mn18Cr18N Forging, Rolling, GB 1Mn18Cr18N Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
Technical Standards - JB/T 1268 - 1993 or By agreement.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION / DATASHEET - 1Mn18Cr18N
MATERIAL CATEGORY: Nonmagnetic forged ring for steam turbine generator
MATERIAL SPECIFICATIONS: JB/T 1268 -93
CHEMICAL COMPOSITION (WEIGHT %)
C(%): ≤0.12
Si(%): ≤0.80
Mn(%): 17.5~20.0
P(%)≤: 0.050
S(%)≤: 0.015
Cr(%): 17.5~20.0
Si(%): ≤0.80
Mn(%): 17.5~20.0
P(%)≤: 0.050
S(%)≤: 0.015
Cr(%): 17.5~20.0
Ni(%): -
Mo(%): -
V%): -
W(%): -
Al(%): ≤0.04
N(%): 0.40 ~0.60
N(%): 0.40 ~0.60
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Grade one
σb≥ /MPa: 790~970
σ0.2 ≥/MPa: 830
δ≥(%): 21
σ0.2 ≥/MPa: 830
δ≥(%): 21
ψ≥(%): 50
Akv ≥/J: -
Akv ≥/J: -
Grade two
σb≥ /MPa: 980~1030
σ0.2 ≥/MPa: 900
δ≥(%): 19
σ0.2 ≥/MPa: 900
δ≥(%): 19
ψ≥(%): 57
Akv ≥/J: -
TYPICAL APPLICATIONS
High-voltage electrical apparatus, bolts and nuts
Transformer tank
Generator
Preparation equipments
Electronics
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + ageing
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + ageing
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Mr Chen, Mr.Jiang - Email: lh.steel@hotmail.com
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Mr Chen, Mr.Jiang - Email: lh.steel@hotmail.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Hot search:1Mn18Cr18N
Previous page:X50MnCrWN18-4
Last page:56NiCrMoV7
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1