S20430
2014-09-18 15:25:28 Origin： Remark：0 Click：
Description S20430 datasheet, S20430 Chemical, S20430 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
NONMAGNETIC ALLOY DATA SHEET - UNS S20430
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: 16Cr - 3Ni - 7Mn - 3Cu austenitic stainless
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.150
Si (％): ≤ 1.00
Mn (％): 6.50 ~ 9.00
P (％)≤: 0.060
S (％)≤: 0.030
Cr (％): 15.5 ~ 17.5
Ni (％): 1.50 ~ 3.50
Mo (％): -
N (&): 0.05 ~ 0.25
Cu (％): 2.00 ~ 4.00
Si (％): ≤ 1.00
Mn (％): 6.50 ~ 9.00
P (％)≤: 0.060
S (％)≤: 0.030
Cr (％): 15.5 ~ 17.5
Ni (％): 1.50 ~ 3.50
Mo (％): -
N (&): 0.05 ~ 0.25
Cu (％): 2.00 ~ 4.00
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 655
Yield strength, σ0.2/MPa: 310
Elongation, δ ≥(％): 55.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 269
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 269
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：S20430
Previous page：ASTM 204Cu
Last page：AISI 205
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1