S62 Stockist, S62 Equivalent Steel

S62
2024-11-19 04:19:00   Origin:   Remark:0 Click:

Specifications S62 Aerospace Quality Martensitic Stainless steel alloy steel Mechanical properties steelmaking, Electroslag remelting, Rolling, Heat treatment
 
TECHNICAL DATA SHEET - BS S62
 
MATERIAL CATEGORY - Aerospace "S" Series alloy steel
 
MATERIAL SPECIFICATIONS - BS EN 3890-2002, BS EN 2344-2001, BS EN 3146-2001
 
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (%): 0.18 ~ 0.25
Siliconc, Si (%): ≤ 0.80
Manganese, Mn (%): ≤ 1.00
Phosphorus, P (%) ≤: 0.035
Sulfur, S (%) ≤: 0.025
Chromium, Cr (%): 12.0 ~ 14.0
Nickel, Ni (%): ≤ 1.00

Molybdenum, Mo (%):  -
Nb/Ti (%): -
 
HEAT TREATMENT AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: Final Heat treatment
Tensile strength, Rm ≥ MPa: 695~849
Yield strength, Rp0.2 ≥ MPa: 525
Elongation, A5 (%) ≥: 15.0
Hardness ≤ HBW:  201
 
PRODUCT DESCRIPTION
S62 alloy steel is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - QT + SRA.
 
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of
stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
 
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (diameter1): 5.5 to 450mm
Square bar / Flat bar: 10 to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W50 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email:
sales@ccsteels.com

Hot search:S62

Previous page:BS S61
Last page:S80

Share to: