BS S533
2015-06-16 08:37:15 Origin： Remark：0 Click：
Technical specifications of BS S533 Aerospace Standards alloy steel -BS S533 Chemical composition, Mechanical properties from steelmaking, Electroslag remelting, Blooming, Ultrasonic testing, Forging, Rolling, Heat treatment, Cold working, Straightening.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade BS S533
MATERIAL CATEGORY: Aerospace "S" Series alloy steel
MATERIAL SPECIFICATIONS: BS EN 3890-2002, BS EN 2344-2001, BS EN 3146-2001
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.04 ~ 0.07
Si (％): ≤ 0.60
Mn (％): 0.80 ~ 1.80
P (％)≤: 0.035
S (％)≤: 0.025
Cr (％): 15.3 ~ 16.3
Ni (％): 5.00 ~ 5.80
Mo (％): 1.20 ~ 2.00
Si (％): ≤ 0.60
Mn (％): 0.80 ~ 1.80
P (％)≤: 0.035
S (％)≤: 0.025
Cr (％): 15.3 ~ 16.3
Ni (％): 5.00 ~ 5.80
Mo (％): 1.20 ~ 2.00
Nb/Ti (%): Ti 0.05 ~ 0.15
Other(％): Cu 1.40 ~ 2.10
HEAT TREATMENT AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: Solution treatment
Tensile strenght, σb≥/MPa: 590
Tensile strenght, σb≥/MPa: 590
Yield strength, σ0.2≥/MPa: 210
Elongation, δ5 (%)≥: 35
Hardness ≤HBW: -
Elongation, δ5 (%)≥: 35
Hardness ≤HBW: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com.
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1