AISI T2
2015-06-22 09:53:39 Origin: Remark:0 Click:
Specifications T2 Datasheet, AISI T2 Chemical, K11547 Properties from steelmaking, Electroslag remelting, Blooming, Ultrasonic testing, K11547 Forging, Rolling, Heat treatment, Cold working, Straightening, Cold machined. We also possess advanced precision machining equipments for further processing. Please contact us for the specific enquiry today.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - AISI T2
MATERIAL CATEGORY - Low alloy seamless pipe for boiler, heat exchanger, condenser
CHEMICAL COMPOSITION (WEIGHT %)
C (%): 0.10 ~ 0.20
Si (%): 0.10 ~ 0.30
Mn (%): 0.30 ~ 0.61
P (%)≤: 0.025
S (%)≤: 0.025
Cr (%): 0.50 ~ 0.81
Ni (%): -
Mo (%): 0.44 ~ 0.65
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Si (%): 0.10 ~ 0.30
Mn (%): 0.30 ~ 0.61
P (%)≤: 0.025
S (%)≤: 0.025
Cr (%): 0.50 ~ 0.81
Ni (%): -
Mo (%): 0.44 ~ 0.65
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb≥/MPa: 415
Yield strength, σ0.2≥/MPa: 205
Elongation, δ≥(%): 30.0
Hardness ≤|HBW: 179
Yield strength, σ0.2≥/MPa: 205
Elongation, δ≥(%): 30.0
Hardness ≤|HBW: 179
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Boiler, heat exchanger, condenser
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Boiler, heat exchanger, condenser
Chemical equipments
Electronics
Electronics
Bolts and nuts
Valve body
PRODUCT FORMS & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T40 - 400mm X W60 - 1000mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Previous page:ASTM 304B4
Last page:K41545
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1