XM-27 / E-Brite 26-1
2025-03-18 10:39:00 Origin： Remark：0 Click：
Round bars E-Brite 26-1, Flat bar E-Brite 26-1 Inventory, S44627 Ring forging, E-Brite 26-1 rod, S44627 sheet - steelmaking, ESR, Blooming, Hot forging, Rolling, Heat treatment
TECHNICAL DATA SHEET - ASTM XM-27 & E-Brite 26-1
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Ferric chromium stainless steel
Technical standards: ASTM A176, A240
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): ≤ 0.010
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): ≤ 0.40
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 25.0 ～ 27.5
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): 0.75 ~ 1.50
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): ≤ 0.40
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 25.0 ～ 27.5
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): 0.75 ~ 1.50
Nitrogen, N (%): ≤ 0.015
Other (%): Niobium, Nb 0.05 ~ 0.20, Copper, Cu (%) ≤ 0.20, Nb+Cu ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb / MPa: 450 min.
Yield strength, σ0.2 / MPa: 275 min.
Elongation, δ5 (％): -
Reduction of area, ф (％): 45.0
Elongation, δ5 (％): -
Reduction of area, ф (％): 45.0
Hardness (HBW): ≤ 217
APPLICATION FIELD
Oil and gas production equipment
Pulp mill bleach systems
Seawater handling equipment
Tall oil distillation columns and equipment
PRODUCT DESCRIPTION & PROFILE
Round bar (diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 600mm
Square bar / Flat bar: 3mm to 600mm
Wire rod (Diameter): 5.50mm to 16mm
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers, Email: sales@ccsteels.com.
Hot search：XM-27 E-Brite 26-1
Previous page：XC90
Last page：E-Brite 26-1
