7-Mo Plus
2015-09-29 10:25:17 Origin: Remark:0 Click:
Material specification 7-Mo Plus datasheet,7-Mo Plus Chemical,7-Mo Plus Ring forging, 7-Mo Plus Bar, Wire rod,7-Mo Plus sheet - steelmaking, ESR, Blooming,Forging,Rolling,Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION / DATASHEET - ASTM 7-Mo Plus / S32950
MATERIAL CATEGORY: Duplex stainless steel
Technical standards: ASTM A479
CHEMICAL COMPOSITION (WEIGHT %)
C(%): ≤0.030
Si(%): ≤0.60
Mn(%): ≤2.00
P(%)≤: 0.035
S(%)≤: 0.010
Cr(%): 26.0~29.0
Ni(%): 3.50~5.20
Mo(%): 1.00~2.50
Si(%): ≤0.60
Mn(%): ≤2.00
P(%)≤: 0.035
S(%)≤: 0.010
Cr(%): 26.0~29.0
Ni(%): 3.50~5.20
Mo(%): 1.00~2.50
N (%): 0.15~0.35
Other (%): -
MECHANICAL PROPERTIES
Form: round bar
σb/MPa: 690 min.
σ0.2/MPa: 480 min.
δ(%): 15 min.
ф(%): -
δ(%): 15 min.
ф(%): -
Hardness (HBW): -
APPLICATION FIELD
Food processing equipment
Hydrometallurgy, heat exchangers
Oil and gas production equipment
Pulp mill bleach systems
Seawater handling equipment
Tall oil distillation columns and equipment
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Mr Chen, Mr.Jiang - Email: lh.steel@hotmail.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Mr Chen, Mr.Jiang - Email: lh.steel@hotmail.com
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Previous page:E-Brite 26-1
Last page:Ferralium 255
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1