AM-350
2015-10-14 11:56:11 Origin： Remark：0 Click：
Specifications AM-350 datasheet,AM-350 Chemical, AISI 633 Ring forging AM-350 Bar,Wire rod, sheet - steelmaking, ESR, Blooming, Forging, Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
TECHNICAL SPECIFICATION DATASHEET - Grade AM-350
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Precipitation hardening stainless steel
Technical standards - ASTM A693
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.07 ~ 0.11
Si (％): ≤ 0.50
Mn (％): 0.50 ~ 1.25
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 16.0 ~ 17.0
Ni (％): 4.00 ~ 5.00
Mo (％): 2.50 ~ 3.25
Other (％): N 0.07 ~ 0.13
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate,sheet,strip
Condition: annealing
Tensile strength, σb/MPa: ≤1380
Yield strength, σ0.2/MPa: 585~620
Elongation, δ(％): 8~12
Reduction of area, ф (％): -
Hardness | HRB: ≤30
Form: plate,sheet,strip
Condition: H850
σb/MPa: 1175
σ0.2/MPa: 1030
δ(％): 2~8
ф(％): -
Hardness | HRB: ≥42
Form: plate,sheet,strip
Condition: H1000
σb/MPa: 1140
σ0.2/MPa: 1000
δ(％): 2~8
ф(％): -
Hardness | HRB: ≥36
APPLICATION FIELD
Good resistance to chloride stress-corrosion cracking.
Food processing equipment
Hydrometallurgy, heat exchangers
Oil and gas production equipment
Pulp mill bleach systems
Seawater handling equipment
Tall oil distillation columns and equipment
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：AM-350
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1