XM-5
2014-09-20 07:35:23 Origin： Remark：0 Click：
Descriptions XM-5 Round bar, flat bar, and forgings Steelmaking, Hot forging/rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined.
ALLOY DATA SHEET - ASTM XM-5
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: 18Cr - 8Ni - 4Mn austenitic stainless
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): 2.50 ~ 4.50
P (％)≤: 0.20
S (％)≤: ≥ 0.15
Cr (％): 17.0 ~ 19.0
Ni (％): 7.00 ~ 10.0
Mo (％): ≤ 0.60
Si (％): ≤ 1.00
Mn (％): 2.50 ~ 4.50
P (％)≤: 0.20
S (％)≤: ≥ 0.15
Cr (％): 17.0 ~ 19.0
Ni (％): 7.00 ~ 10.0
Mo (％): ≤ 0.60
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 515
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(％): 40.0
Reduction of area, ф ≥ (％): 50
Hardness via heat treatment /HBW: 217
Reduction of area, ф ≥ (％): 50
Hardness via heat treatment /HBW: 217
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment.
TYPICAL APPLICATIONS
Chemical equipment and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：XM-5
Previous page：AISI 303 Plux X
Last page：S30310
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1