Nitronic 60
2024-11-01 12:53:00 Origin： Remark：0 Click：
Nitronic 60 is an Austenitic Nonmagnetic Stainless Steel of main alloy 17Cr-8Ni-8Mn-4Si, it offers high Properties from Steelmaking, ESR melted. Nitronic 60 Round bar instock.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
Material Technical Datasheet - Nitronic 60
Material Category - Austenitic stainless steel
Technical standards: Nonstandards frequently-used alloy
Main Chemical Compositions (mass weight - %)
Carbon, C (％): ≤ 0.10
Silicon, Si (％): 3.50 ~ 4.50
Manganese, Mn (％): 7.00 ~ 9.00
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (％): 8.00 ~ 9.00
Molybdenum, Mo (％): -
Nitrogen, N (％): 0.08 ~ 0.18
Silicon, Si (％): 3.50 ~ 4.50
Manganese, Mn (％): 7.00 ~ 9.00
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (％): 8.00 ~ 9.00
Molybdenum, Mo (％): -
Nitrogen, N (％): 0.08 ~ 0.18
TYPYCAL MECHANICAL PROPERTIES
Tensile strength, σb ≥ MPa: 655
Yield strength, σ0.2 ≥ MPa: 345
Elongation, δ5 ≥ (％): 35.0
Elongation, δ5 ≥ (％): 35.0
Reduction of area, ф ≥ (％): -
Hardness | HB: 241
APPLICATION FIELD
Tall oil distillation columns and equipments, Food processing equipments.
Hydrometallurgy, heat exchangers, Oil and gas production equipments, Pulp mill bleach systems.
Seawater handling equipments.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in hot rolled/forged condition.
Final heat treatment - solution treatment.
The alloy is usually produced by AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in hot rolled/forged condition.
Final heat treatment - solution treatment.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 500mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 500mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Previous page：S24000
Last page：21-6-9LC / XM-11
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1