ASTM A565 GR.615HT
2015-12-09 21:54:34 Origin： Remark：0 Click：
Description A565 Gr. ASTM 615HT Round bars, ASTM A565 type 615HT Wire rod, Steelmaking, ESR, Blooming, Hot forging & Rolling, Heat treatment, Straightened,Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
Material specifications: ASTM A565 or by Agreement.
RAW MATERIAL SPECIFICATIONS - Grade ASTM A565 Gade 615HT
INVENTORY & STOCKLIST - Strip 0.70 X 200mm in coil form.
MATERIAL CATEGORY - High temperature martensitic high content chromium Bar & forge piece
MATERIAL SPECIFICATIONS - ASTM A565
MELTING PROCESS - VIM + Consumable electrode remelted steel
H S CODE For Customs - 72202030 / 72201100 / 7220 9000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass Weight - %)
H S CODE For Customs - 72202030 / 72201100 / 7220 9000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (Mass Weight - %)
C (％): 0.15 ~ 0.20
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 12.0 ~ 14.0
Ni (％): 1.80 ~ 2.20
Mo (％): ≤ 0.50
W (％): 2.50～3.50
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 12.0 ~ 14.0
Ni (％): 1.80 ~ 2.20
Mo (％): ≤ 0.50
W (％): 2.50～3.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT CYCLE
Condition: annealed
Tensile strength /σb ≥/MPa: -
Yield strength /σ0.2 ≥/MPa:-
Yield strength /σ0.2 ≥/MPa:-
Elongation /δ ≥(％): -
Reduction of area /ф ≥(％): -
Hardness | HRS: ≤311
Reduction of area /ф ≥(％): -
Hardness | HRS: ≤311
Condition of heat treatment: HT 981℃ ~ 1080℃ air or oil cooled, ≥620℃ X 2H, twice tempering processed
Tensile strength /σb ≥/MPa: 965
Yield strength /σ0.2 ≥/MPa: 760
Yield strength /σ0.2 ≥/MPa: 760
Elongation /δ ≥(％): 15.0
Reduction of area /ф ≥(％): 45.0
Hardness | HRS: 302 ~ 352
Reduction of area /ф ≥(％): 45.0
Hardness | HRS: 302 ~ 352
PRODUCT DESCRIPTION
The alloy is usually produced by BEF AOD / EAF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by BEF AOD / EAF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Automobile parts, exhaust pipe.
Electronics, Turbine motor blade.
Bolt and nut. Valve.
Pressure ve.ssel.
Bolt and nut. Valve.
Pressure ve.ssel.
PRODUCT SHAPES & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 600mm
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 600mm
Steel Coil: THK 0.4 ~ 3.0 X Width 10 ~ 350mm X R/L
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 ~ 1000mm X L1000 ~ 4000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email:sales@ccsteels.com.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email:sales@ccsteels.com.
Previous page：34Cr4E
Last page：ASTM A565 Gr.616HT
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1