Z10CNWT17-13B
2024-11-15 03:56:00 Origin： Remark：0 Click：
NF A35-578 -1991 Austenitic Steel Z10CNWT17-13B Round bar, Flat Bar, Sheet Z10CNW17 hot forging & Rolling, heat treatment, warm worked
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - Z10CNWT17-13B
MATERIAL CATEGORY - Corrosion resisting steel
TYPE OF STEEL - Cr-Ni-W-Ti Steel
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (％): 0.07 ~ 0.12
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (%): 12.0 ~ 14.0
Tungsten, W (％): 2.50 ~ 4.00
Titanium, Ti (%): 4 X C ~ 0.80
Boron, B (%): 0.001 ~ 0.006
PRODUCT DESCRIPTION
Z10CNWT17-13B alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment / Ageing
Z10CNWT17-13B alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment / Ageing
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Automobile parts, exhaust pipe.
Electronics, Turbine motor blade. Bolt and nuts, Valve, Pressure vessel
PRODUCT PROFILE AND DIMENSIONS
Round bar / Wire rod (diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel sheet via cold rolled: T0.5 - 3mm X W100 - 1000mm X Lmm
TECHNICAL SALES ASSISTANCE
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. Email: sales@ccsteels.com
Hot search：Z10CNWT17-13B
Previous page：Z10CNW17
Last page：ASTM H16 /T20816
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1