Super alloy MP35N
2016-01-29 11:56:46 Origin： Remark：0 Click：
Ageing hardened alloy MP35N Round bar, Flat bar, Super alloy MP35N Properties from Steelmaking, ESR/VAR remelted, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - MP35N
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL STANDARDS: AMS 5844
MAIN FEATURES: MP35N is an ageing hardened Nickel-Cobalt base alloy that has a unique combination of properties - ultra high strength, toughness, ductility and outstanding corrosion resistance. MP35N resists corrosion in hydrogen sulphide, salt water and other chloride solutions. It also has excellent resistance to crevice and stress corrosion cracking in sea water and other hostile environments.
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 0.15
Manganese, Mn (％): ≤ 0.15
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 19.0 ～ 21.0
Nickel, Ni (％): 33.0 ~ 37.0
Molybdenum, Mo (％): 9.00 ~ 11.0
Silicon, Si (％): ≤ 0.15
Manganese, Mn (％): ≤ 0.15
Phosphorus, P (％) ≤: 0.015
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 19.0 ～ 21.0
Nickel, Ni (％): 33.0 ~ 37.0
Molybdenum, Mo (％): 9.00 ~ 11.0
Cobalt, Co (%): 34.20 ~ 36.0
Titanium, Ti (%): ≤ 1.00
Boron, B (%): ≤ 0.010
Ferrum, Fe (％): ≤ 1.00
Ferrum, Fe (％): ≤ 1.00
Similar material grade: R30035
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed condtion
Tensile strength, Rm ≥ MPa: 800 ~ 1000
Yield strength, Rp0.2 ≥ MPa: -
Elongation, A5 ≥ (％): -
Elongation, A5 ≥ (％): -
Reduction of area, Z ≥ (％): -
Hardness | HRB: -
DENSITY: 8.43 g/cm3
WORKING TEMPERATURE: 200～315°C, 395 max.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the annealed condition.
Final heat treatment - solution treatment.
Bars are usually supplied bright surface in the annealed condition.
Final heat treatment - solution treatment.
FORMS AND DIMENSIONS
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：MP35N
Last page：X160CrCoMoV12-3
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1