Nitronic 20
2016-02-26 11:39:59 Origin： Remark：0 Click：
Specifications Austenitic Stainless Steel Nitronic 20 Round bar, Flat bar, Tubings, Nitronic 20 ESR Quality melted, Hot forging & Rolling, Heat treatment
TECHNICAL DATA SHEET - Nitronic 20
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Austenitic stainless steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.28 ~ 0.38
Silicon, Si (％): ≤ 0.80
Manganese, Mn (％): 1.50 ~ 3.50
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 22.0 ~ 24.0
Nickel, Ni (％): 7.00 ~ 9.00
Molybdenum, Mo (％): -
Silicon, Si (％): ≤ 0.80
Manganese, Mn (％): 1.50 ~ 3.50
Phosphorus, P (％) ≤: 0.035
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 22.0 ~ 24.0
Nickel, Ni (％): 7.00 ~ 9.00
Molybdenum, Mo (％): -
Copper, Cu (%): -
Titanium, Ti (%): -
Nitrogen, N (％): 0.28 ~ 0.40
APPLICATION FIELD
Tall oil distillation columns and equipments
Food processing equipments
Hydrometallurgy, heat exchangers
Oil and gas production equipments
Pulp mill bleach systems
Seawater handling equipments
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / AOD Followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by BEF / AOD Followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W30 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
Tubings: OD100 - 1300mm, with wall thickness ranging from 20 to 600 mm.
Sheet steel via cold rolled: T0.5 - 6mm X W30 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
Tubings: OD100 - 1300mm, with wall thickness ranging from 20 to 600 mm.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：X153CrMoV12
Last page：Nitronic 30
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1