Nitronic 40
2024-11-02 13:00:00 Origin： Remark：0 Click：
Specifications Nitronic 40 Round bar, Flat bar and Forgings. Nitronic 40 Stock Available, ESR Ingot, Hot forging / rolling, Heat treated, Cold machined
TECHNICAL DATA SHEET - Nitronic 40
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Austenitic stainless steel
HS CODE FOR CUSTOMS: 72221100 / 72222000
MAIN CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 8.00 ~ 10.0
Phosphorus, P (％) ≤: 0.060
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 19.0 ~ 21.5
Nickel, Ni (％): 5.50 ~ 7.50
Molybdenum, Mo (％): -
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 8.00 ~ 10.0
Phosphorus, P (％) ≤: 0.060
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 19.0 ~ 21.5
Nickel, Ni (％): 5.50 ~ 7.50
Molybdenum, Mo (％): -
Tungsten, W (%): -
Copper, Cu (%): ≤ 1.00
Titanium, Ti (%): -
Cobalt, Co (%): -
Nitrogen, N (％): 0.14 ~ 0.40
Nitrogen, N (％): 0.14 ~ 0.40
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 620
Yield strength, Rp0.2 ≥ MPa: 345
Elongation, A5 ≥ (％): 40.0
Elongation, A5 ≥ (％): 40.0
Reduction of area, Z ≥ (％): 60.0
Hardness | HRB: -
APPLICATION FIELD
Tall oil distillation columns and equipments.
Food processing equipments, Hydrometallurgy, heat exchangers.
Oil and gas production equipments, Pulp mill bleach systems, Seawater handling equipments.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T30 - 400mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified engineers.
Previous page：S20400 / Nitronic 30
Last page：13MnNi6-3
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1