S162 / AMS 6512
2016-02-29 11:45:51 Origin： Remark：0 Click：
Description S162 & AMS 6512 Round bar, flat bar, sheet and forgings AMS 6512 Stock Available, VIM + ESR / VAR, Hot forging, Heat treatment
TECHNICAL DATA SHEET - C250 & S162 & AMS 6512
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Maraging stainless steel
SPECIAL MELTING PROCESS - VIM + ESR
MATERIAL FORMAT - Round bar, sheet
STOCKLIST - Diameter 50mm ~ 165mm
HS Code For Customs - 72221100 / 72221900 / 72222000
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 0.10
Manganese, Mn (％): ≤ 0.10
Phosphorus, P (％) ≤: 0.010
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): ≤ 0.50
Nickel, Ni (％): 17.0 ~ 19.0
Molybdenum, Mo (％): 4.60 ~ 5.20
Silicon, Si (％): ≤ 0.10
Manganese, Mn (％): ≤ 0.10
Phosphorus, P (％) ≤: 0.010
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): ≤ 0.50
Nickel, Ni (％): 17.0 ~ 19.0
Molybdenum, Mo (％): 4.60 ~ 5.20
Cobalt, Co (%): 7.00 ~ 8.50
Titanium, Ti (%): 0.30 ~ 0.60
Other (％): Al 0.05 ~ 0.15, Cu ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: after maraging heat treated 480 ℃
Tensile strength, σb/≥ MPa: 1750
Yield strength, σ0.2/≥ MPa: 1720
Elongation, δ ≥(％): 6.0
Elongation, δ ≥(％): 6.0
Reduction of area, ф ≥ (％): -
Hardness | HRC: 48 min.
APPLICATION FIELD
Alloy maraging 250 / AMS 6512 is an age-hardenable iron-nickel steel. Alloy C250 combines ultra-high strength (1750MPa), superior toughness, readily machinable in pre-aged condition, excellent transverse properties and resistance to crack propagation. maraging C250 is used for missile and ejector systems, slat tracks and drive shafts.
PRODUCT DESCRIPTION
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment, ageing treated.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment, ageing treated.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Previous page：K92890 / Maraging C250
Last page：Maraging steel 1.6359 / K92890
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1