S32053
2024-12-05 15:02:00 Origin： Remark：0 Click：
Description S32053 technical datasheet, S32053 Round bar, Flat bar, Plate S32053 Properties from Steelmaking, Hot forging / rolling, Heat treated
TECHNICAL DATA SHEET - UNS S32053
MATERIAL CATEGORY - 23Cr-25Ni-5Mo-N Austenitic steel
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the softened condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the softened condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 22.0 ~ 24.0
Nickel, Ni (％): 24.0 ~ 26.0
Molybdenum, Mo (％): 5.00 ~ 6.00
Nitrogen, N (&): 0.17 ~ 0.22
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 22.0 ~ 24.0
Nickel, Ni (％): 24.0 ~ 26.0
Molybdenum, Mo (％): 5.00 ~ 6.00
Nitrogen, N (&): 0.17 ~ 0.22
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Tensile strength, σb / MPa: 640
Yield strength, σ0.2 / MPa: 295
Elongation, δ5 (％): 40.0
Hardness | HRB (HRC): 95
Cold bending property: N
Yield strength, σ0.2 / MPa: 295
Elongation, δ5 (％): 40.0
Hardness | HRB (HRC): 95
Cold bending property: N
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
PRODUCT FORMS & DIMENSIONS
Round bar / rod / disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 8mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
Round bar / rod / disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 8mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
Hot search：S32053
Total list
Monthly rank
- 20P550
- 20Z50NMC12
- 20EN 58B
- 18ASTM A890 Grade 1B
- 18Z10CNW17
- 16SAE 51416
- 11Z5CNU17-4PH
- 10AISI 430FR
- 9SAE 51410
- 9ASTM A890 Gr.3A