S32100
2014-09-24 15:14:56 Origin： Remark：0 Click：
Austenitic Stainless Steel S32100 Round bar, Flat bar, Plate S32100 Wire Rod Steelmaking, Hot forging, Hot rolling, Heat treatment
MATERIAL DATA SHEET - UNS S32100
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - 18Cr-11Ni-Ti austenitic stainless
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.08
Manganese, Mn (％): ≤ 2.00
Silicon, Si (％): 0.25 ~ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 17.0 ~ 19.0
Silicon, Si (％): 0.25 ~ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 17.0 ~ 19.0
Nickel, Ni (%): 9.00 ~ 12.0
Titanium, Ti (%): 5C ~ 0.70
Nitrogen, N (%): ≤ 0.10
Molydenum, Mo (%): ≤ 0.75
Copper, Cu (%): ≤ 0.75
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb ≥ MPa: 515
Yield strength, σ0.2 / MPa: 205
Elongation, δ5 ≥ (％): 40.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 269
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 269
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT.
TYPICAL APPLICATIONS
Chemical equipments, Bolts and nuts
Mechanical parts used in the condition of corrosion resistance
Pressure vessel.
AVAILABLE FORMS AND DIMENSIONS
Round bar (diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Round bar (diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：S32100
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1