S32615
2024-10-30 09:15:00 Origin: Remark:0 Click:
Technical Data Sheet Austenitic Steel S32615 Round bar, S32615 rolled plate, S32615 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - S32615
MATERIAL CATEGORY: 19Cr-21Ni-5Si-2Cu Austenitic steel
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): ≤ 0.07
Silicon, Si (%): 4.80 ~ 6.00
Manganese, Mn (%): ≤ 2.00
Phosphorus, P (%) ≤: 0.045
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 16.5 ~ 19.5
Nickel, Ni (%): 19.0 ~ 22.0
Molybdenum, Mo (%): 0.30 ~ 1.50
Nitrogen, N (&): -
Copper, Cu (%): 1.50 ~ 2.50
Silicon, Si (%): 4.80 ~ 6.00
Manganese, Mn (%): ≤ 2.00
Phosphorus, P (%) ≤: 0.045
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 16.5 ~ 19.5
Nickel, Ni (%): 19.0 ~ 22.0
Molybdenum, Mo (%): 0.30 ~ 1.50
Nitrogen, N (&): -
Copper, Cu (%): 1.50 ~ 2.50
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Form: Plate, sheet, strip
Tensile strength, Rm / MPa: 620
Yield strength, Rp0.2 / MPa: 275
Elongation, A5 (%): 35.0
Reduction of area, Z (%): -
Elongation, A5 (%): 35.0
Reduction of area, Z (%): -
Hardness | HRB: 95
Hardness | HBW: 217
Cold bending property: N
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, Pressure vessel.
Chemical equipment.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / rod / disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 8mm to 600mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
Round bar / rod / disc (diameter): 5.5mm to 850mm
Square bar / Flat bar: 8mm to 600mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
Hot search:S32615
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1