S33400 Stockist, S33400 Equivalent Steel

S33400
2014-09-26 09:19:03   Origin:   Remark:0 Click:

Descriptions S33400 datasheet, S33400 Chemical, Grade S33400 Properties Steelmaking, ESR & VAR technique, Blooming, Hot forging & rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
STAINLESS STEEL DATA SHEET - UNS S33400
MATERIAL CATEGORY: 19Cr-20Ni-Al-Ti Austenitic steel

PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in softened condition.
Final heat treatment - solution treatment.
MATERIAL SPECIFICATIONS
ASTM A959 (2004), A276, A312, A632, A176, A580
AVAILABILITY
Round bar / Flat bar / Steel strip / Square bar
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft

CHEMICAL COMPOSITION (WEIGHT %)
C (%):     ≤ 0.08
Si (%):     ≤ 1.00
Mn (%):   ≤ 1.00
P (%)≤:   0.030
S (%)≤:   0.015
Cr (%):    18.0 ~ 20.0
Ni (%):    19.0 ~ 21.0
Mo (%):   -
Al (%):     0.15 ~ 0.60
Ti (%):     0.15 ~ 0.60
MECHANICAL PROPERTIES UNDER FINAL HEAT TREATMENT
Form: Plate,sheet,strip
Condition: annealing
Tensile strength, σb/MPa: 485
Yield strength, σ0.2/MPa: 170
Elongation, δ (%): 30.0
Reduction of area, ф (%):   -
Hardness | HRB: 92
Cold bending property: N
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
PRODUCT AVAILABLE PROFILE & FORMS 
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.5mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs / tubes / slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, E-mail:
sales@ccsteels.com
 

Hot search:S33400

Previous page:AISI 334
Last page:SAE J405

Share to: