A-286
2014-09-26 14:24:35 Origin： Remark：0 Click：
Specifications A-286 Inventory, Datasheet A-2860 Chemical, Stocklist A-286 Properties Rod from steelmaking, hot forging, rolling, heat treatment, cold working.We also possess advanced precision machining equipments for further processing
HIGH ALLOY DATA SHEET - AISI 660 & Type A-286
MATERIAL CATEGORY - 15Cr-26Ni-1Mo-2Ti Austenitic steel
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
AVAILABILITY FORMS
Round bar / flat bar / strip / forgings / plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Round bar / flat bar / strip / forgings / plate
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 500mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 500mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
INVENTORY - HOT ROLLED BAR - Diameter: 10 - 140mm
CHEMICAL COMPOSITION ( MASS WEIGHT % )
C (％): ≤ 0.08
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 13.5 ~ 16.0
Ni (％): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 13.5 ~ 16.0
Ni (％): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
Ti (％): 1.90 ~ 2.35
V (%): 0.10 ~ 0.50
B (%): 0.003 ~ 0.010
Al(%): ≤ 0.35
| Test Temperature | Yield 0.2% | Yield 0.2% | Yield 0.2% | Yield 0.2% | Tensile Strength | % Elongation in 2" {50.8mm} | % Reduction of Area | |
|---|---|---|---|---|---|---|---|---|
| 0.2% offset | 0.2% offset | |||||||
| f/c | ksi | mpa | ksi | Mpa | ksi | Mpa | ||
| 70/21 | 90 | 621 | 92 | 655 | 145 | 1000 | 24 | 45 |
| 400/204 | 76 | 524 | 93 | 645 | 143 | 986 | 21 | 52 |
| 800/427 | 72 | 496 | 93 | 641 | 138 | 951 | 19 | 35 |
| 1000/538 | 62 | 427 | 87 | 603 | 131 | 903 | 18 | 31 |
| 1100/593 | 64 | 445 | 90 | 621 | 122 | 841 | 21 | 23 |
| 1200/649 | 62 | 431 | 88 | 607 | 103 | 713 | 13 | 14 |
| 1300/704 | 68 | 472 | 86 | 593 | 86 | 595 | 11 | 10 |
| 1400/760 | 44 | 307 | 62 | 427 | 64 | 441 | 18 | 23 |
| 1500/816 | ||||||||
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessels
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessels
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. Email us: sales@ccsteels.com.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. Email us: sales@ccsteels.com.
Hot search：A-286
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1