AL-6XN / INCOLOY 25-6HN
2025-04-09 16:01:00 Origin: Remark:0 Click:
ASTM B564-04 Nickel alloy forgings AL-6XN / INCOLOY 25-6HN Round bar, plate, flat bar, ESR melted, Blooming, Forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - AL-6XN & INCOLOY 25-6HN
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Fe -Ni-Cr-Mo-N Alloy
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (%): ≤ 0.030
MATERIAL CATEGORY: Fe -Ni-Cr-Mo-N Alloy
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (%): ≤ 0.030
Silicon, Si (%): ≤ 1.00
Manganese, Mn (%): ≤ 2.00
Phosphorus, P (%) ≤: 0.040
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 20.0 ~ 22.0
Nickel, Ni (%): 23.5 ~ 25.5
Molybdenum, Mo (%): 6.00 ~ 7.00
Copper, Cu (%): ≤ 0.75
Manganese, Mn (%): ≤ 2.00
Phosphorus, P (%) ≤: 0.040
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 20.0 ~ 22.0
Nickel, Ni (%): 23.5 ~ 25.5
Molybdenum, Mo (%): 6.00 ~ 7.00
Copper, Cu (%): ≤ 0.75
Aluminum, Al (%): -
Titanium, Ti (%): -
Nitrogen, N (%): 0.18 ~ 0.25
Boron, B (%): -
Ferrum, Fe (%): remainder
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Solution annealed
Tensile strength, σb ≥ MPa: 655
Yield strength, σ0.2 ≥ MPa: 310
Elonghation, δ5 ≥ (%): 30.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND DIMENSIONS
Round bar (diameter): 5.50mm to 650mm
Square bar / flat bar: 8mm to 600mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Solution annealed
Tensile strength, σb ≥ MPa: 655
Yield strength, σ0.2 ≥ MPa: 310
Elonghation, δ5 ≥ (%): 30.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND DIMENSIONS
Round bar (diameter): 5.50mm to 650mm
Square bar / flat bar: 8mm to 600mm
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Hot search:AL-6XN/INCOLOY 25-6HN
Previous page:N08367
Last page:SK65M/SK7M