UNS N08811
2014-09-28 10:02:55 Origin： Remark：0 Click：
※ DATA SHEET -UNSN08811※ ※ MATERIAL CATEGORY: 22Cr-34Ni-Al-Ti Austenitic steel ※ PRODUCT DESCRIPTIONThe alloy ...
DATA SHEET - UNS N08811
MATERIAL CATEGORY: 22Cr-34Ni-Al-Ti Austenitic steel
※ PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
※ PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS
ASTM A508 (2006)
ASTM A508 (2006)
AVAILABILITY
Black bar /Flat bar / steel strip / square bar
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Black bar /Flat bar / steel strip / square bar
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
CHEMICAL COMPOSITION (WEIGHT %) - UNS N08811
C (％): 0.06~0.10
Si (％): ≤1.00
Mn (％): ≤1.50
P (％)≤: 0.045
S (％)≤: 0.015
Cr (％): 19.0~23.0
Ni (％): 30.0～35.0
Mo (％): -
N (&): -
Other (％): Fe ≥ 39.5, Al 0.15~0.60,Ti 0.15~0.60, (Al+Ti)0.85~1.20, Cu ≤ 0.75
Si (％): ≤1.00
Mn (％): ≤1.50
P (％)≤: 0.045
S (％)≤: 0.015
Cr (％): 19.0~23.0
Ni (％): 30.0～35.0
Mo (％): -
N (&): -
Other (％): Fe ≥ 39.5, Al 0.15~0.60,Ti 0.15~0.60, (Al+Ti)0.85~1.20, Cu ≤ 0.75
MECHANICAL PROPERTIES ( FINAL HEAT TREATMENT OR Q/T)
σb/MPa: 450
σ0.2≥/MPa: 170
σ0.2≥/MPa: 170
δ5≥(％): 30
Hardness HBW: -
Hardness HBW: -
Hardness HRB (HRC): -
Cold bending property: N (No need testing of cold bending)
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
INVENTORY - hot forged bar
Diameter: 90mm
Diameter: 90mm
Quantity: 24.3kg
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Email: sales@ccsteels.com
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Email: sales@ccsteels.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 0.50mm to 3000mm
Square bar / Flat bar: 3mm to 2000mm
Plate / Sheet steel / Steel strip: 0.1mm to 2500mm
Width: 8mm to 2500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Round bar / Wire rod (Diameter): 0.50mm to 3000mm
Square bar / Flat bar: 3mm to 2000mm
Plate / Sheet steel / Steel strip: 0.1mm to 2500mm
Width: 8mm to 2500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Previous page：UNS N08810
Last page：904L / N08904
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1