S31260 Stockist, S31260 Equivalent Steel

S31260
2014-09-28 10:29:43   Origin:   Remark:0 Click:

ASTM A276 Material Specification Corrosion Resistant Steel S31260 Round bar, flat bar, plate and wire forgings S31260 Stock Available Heat treatment
TECHNICAL DATA SHEET - UNS S31260
MATERIAL CATEGORY: 25Cr-6Ni-3Mo-W-Cu-N Austenite-Ferrite type alloy steel
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution annealing (+ AT).
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
 
CHEMICAL COMPOSITION (mass weight - %) - UNS S31260
Carbon, C (%): ≤ 0.03
Silicon, Si(%): ≤ 0.75
Manganese, Mn (%): ≤ 1.00
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 24.0~26.0
Nickel, Ni (%): 5.50~7.50
Molybdenum, Mo (%): 2.50~3.50
Others (%): Nitrogen 0.10~0.30, Copper 0.20~0.80, Tungsten 0.10~0.50
Form: plate,sheet,strip
Tensile strength, σb/MPa:   690
Yield strength, σ0.2/MPa:  450
Elongation, δ (%): 25
Reduction of area, ф (%):   -
Hardness | HRC(HBW): 31(293)
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of
stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.50mm to 800mm
Square bar / Flat bar: 8mm to 2000mm
Plate / Sheet steel / Steel strip: 0.1mm to 2500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.

Hot search:UNS 31260

Previous page:UNS 31200
Last page:UNS 31500

Share to: