Inconel Alloy 603
2017-04-17 08:59:22 Origin： Remark：0 Click：
Technical specifications of ASTM B166-2011 Nickel-Chromium-Iron alloy Inconel 603 datasheet,Alloy 603 Chemical compositions, Inconel Alloy 603 mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Inconel Alloy 603 Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Inconel Alloy 603
TECHNICAL SPECIFICATION: ASTM B166-2011
MATERIAL CATEGORY: Ni-Cr-Fe Alloy
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.20 ~ 0.40
C (％): 0.20 ~ 0.40
Si (％): ≤ 0.50
Mn (％): ≤ 0.15
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (％): 24.0 ~ 26.0
Ni (％): remainder
Mo (％): -
Mn (％): ≤ 0.15
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (％): 24.0 ~ 26.0
Ni (％): remainder
Mo (％): -
Cu (%): ≤ 0.50
Al (%): 2.40 ~ 3.00
Ti (%): 0.01 ~ 0.25
Zr (%): 0.01 ~ 0.10
Y (%): 0.01 ~ 0.15
Nb (%): -
Co (%): -
N (%): -
B (%): -
W (%): -
Ce (%): -
Fe (%): 8.00 ~ 11.0
MECHANICAL PROPERTIES
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 650
MECHANICAL PROPERTIES
Condition: Cold/ Hot worked, annealed
Tensile strength, σb/≥ MPa: 650
Yield strength, σ0.2/≥ MPa: 300
Elonghation, δ ≥(％): 25.0
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged or double aged
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 650mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.25 ~ 3.00, W5.0 ~ 500, in coil form
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Forging piece: stepped shafts with discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Previous page：B166 Gr.N06603
Last page：B166 Gr.N06696
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1