S32101
2014-09-28 10:46:27 Origin： Remark：0 Click：
Description S32101 datasheet, S32101 Chemical, S32101 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, 100% Ultrasonic flaw detection test
ALLOY DATA SHEET - UNS S32101
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - 22Cr-2Ni-5Mn-Mo-Cu-N austenitic stainless
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.040
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 4.00 ~ 6.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 21.0 ~ 22.0
Nickel, Ni (％): 1.35 ~ 1.70
Molybdenum, Mo (％): 0.10 ~ 0.80
Nitrogen, N (%): 0.20 ~ 0.25
Copper, Cu (％): 0.10 ~ 0.80
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 4.00 ~ 6.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 21.0 ~ 22.0
Nickel, Ni (％): 1.35 ~ 1.70
Molybdenum, Mo (％): 0.10 ~ 0.80
Nitrogen, N (%): 0.20 ~ 0.25
Copper, Cu (％): 0.10 ~ 0.80
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 700
Yield strength, σ0.2/MPa: 530
Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 290
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 290
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT.
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
AVAILABLE FORMS AND DIMENSIONS
Round bar & Disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 3 ~ 350mm
Round bar & Disc (diameter): 5.5 ~ 850mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：S32101
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1