NF X8CrMnCuNB17-8-3
2017-04-27 08:30:08 Origin： Remark：0 Click：
NF EN 10088-2 Specifications X8CrMnCuNB17-8-3 Austenitic Stainless Steel Round bar, Flat bar, Plate 1.4597 ESR melting, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - X8CrMnCuNB17-8-3 & 1.4597
TYPE OF STEEL: Austenitic stainless steel
Stock Available: Round bar Diam. 40mm, ESR ingot
MATERIAL CATEGORY: Stainless Steel Plate and Strip
Technical standards: NF EN 10088-2 2005
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.10
Silicon, Si (％): ≤ 2.00
Manganese, Mn (％): 6.50 ~ 8.50
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Molybdenum, Mo (%): ≤ 1.00
Nickel, Ni (％): ≤ 2.00
Copper, Cu (%): 2.00 ~ 3.50
Nitrogen, N (%): 0.15 ~ 0.30
Boron, B (%): 0.0005 ~ 0.0050
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: cold rolled steel strip
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: cold rolled steel strip
Annealed hardness: -
Tensile strength, Rm ≥ MPa: 580 ~ 780
Yield strength, Rp0.2 ≥ MPa: 300
Elongation, A5 ≥ (％): 40.0
Yield strength, Rp0.2 ≥ MPa: 300
Elongation, A5 ≥ (％): 40.0
QT hardness: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT PROFILE
Heavy / middle plate via hot rolled: T3 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form)
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT PROFILE
Heavy / middle plate via hot rolled: T3 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：NF X8CrMnCuNB17-8-3
Previous page：NAS 354N
Last page：Grade C30E4
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1