AM 350
2017-05-16 08:54:30 Origin： Remark：0 Click：
Specifications AM-350/S35000 datasheet, S35000 Chemical, AM-350 Properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - AM 350 & S35000
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Austenitic high-tensile superalloy & Precipitation hardening steel
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.07 ~ 0.11
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): 0.50 ~ 1.25
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 17.0
Nickel, Ni (％): 4.00 ~ 5.00
Molybdenum, Mo (％): 2.50 ~ 3.20
Manganese, Mn (％): 0.50 ~ 1.25
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 16.0 ~ 17.0
Nickel, Ni (％): 4.00 ~ 5.00
Molybdenum, Mo (％): 2.50 ~ 3.20
Nitrogen, N (%): 0.07 ~ 0.13
Cobalt, Co (%): -
Tungsten, W (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: annealed
Tensile strength, σb/≥ MPa: 1380
Yield strength, σ0.2/≥ MPa: 580 ~ 620
Elonghation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Hardness | HB: HRC30 max.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright surface in the solution annealed condition.
Final heat treatment - solution treated + Aged
FORMS AND DIMENSIONS
Round bar / rod / disc (diameter): 5.5mm to 800mm
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 600mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Sheet steel via cold rolled: T0.5 - 6mm X W10 - 600mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1