NF X2CrNiMoCuWN25-7-4
2017-06-01 14:24:40 Origin： Remark：0 Click：
Material technical specifications of NF EN 10088-2 2005 type NF X2CrNiMoCuWN25-7-4 stainless steel plate X2CrNiMoCuWN25-7-4 datasheet,NF X2CrNiMoCuWN25-7-4 Chemical compositions, mechanical properties from Steelmaking, ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF EN 10088-2 2005. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATION & DATASHEET - NF EN X2CrNiMoCuWN25-7-4 & NF 1.4501
TYPE OF STEEL: Austenitic stainless steel
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Stainless Steel Plate and Strip
Technical standards: NF EN 10088-2 2005
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 24.0 ~ 26.0
Mo (%): 3.00 ~ 4.50
Ni (％): 6.00 ~ 8.00
N (%): 0.24 ~ 0.35
Cu (%): 0.50 ~ 1.00
W (%): 0.50 ~ 1.00
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: Hot rolled steel plate
Condition: Hot rolled steel plate
Annealed hardness: -
Tensile strength,σb/≥ MPa: 730 ~ 930
Yield strength, σ0.2/≥ MPa: 530
Elongation, δ ≥(％): 25.0
Yield strength, σ0.2/≥ MPa: 530
Elongation, δ ≥(％): 25.0
QT hardness: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE
Heavy/middle plate via hot rolled: T3 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form)
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE
Heavy/middle plate via hot rolled: T3 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Email: lh.steel@hotmail.com
Hot search：NF X2CrNiMoCuWN25-7-4
Previous page：NF HS12-1-5-5
Last page：DIN HS12-1-4-5
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1