Arnavar
2017-06-15 11:17:45 Origin： Remark：0 Click：
alloys Arnavar datasheet, Arnavar Ex-stock suppliers, Grade Arnavar mechanical properties from Steelmaking, ESR melted, Blooming, Forging, R30007 Hot rolling, Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power.100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL TECHNICAL DATA SHEET - Grade Arnavar
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: American high temperature alloy and other special alloys
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.10 ~ 0.20
Si (％): 0.30 ~ 0.70
Mn (％): 1.20 ~ 1.60
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 19.0 ~ 21.0
MATERIAL CATEGORY: American high temperature alloy and other special alloys
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.10 ~ 0.20
Si (％): 0.30 ~ 0.70
Mn (％): 1.20 ~ 1.60
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 19.0 ~ 21.0
Ni (％): 12.0 ~ 14.0
Mo (％): 1.80 ~ 2.20
Co (%): 41.5 ~ 43.5
Mo (％): 1.80 ~ 2.20
Co (%): 41.5 ~ 43.5
W (%): 2.60 ~ 3.00
Al (%): -
Cu (%): -
Ti (%): -
Be (％): ≤ 0.70
Al (%): -
Cu (%): -
Ti (%): -
Be (％): ≤ 0.70
Fe (%): Remainder
SHORT BRIEF
Grade Arnavar is a corrosion-resistant, nonmagnetic age-hardening alloy with good hot and cold working properties. A cobalt-base high strength alloy, it is characterized principally by its high fatigue resistance, high tensile strength and torque values. Arnavar is vacuum melted to ensure uniformity of composition and cleanliness of the metal.
TYPICAL MECHANICAL PROPERTIES
Condition: as rolled
Tensile strength, σb/≥ MPa: 1790 ~ 2000
Yield strength, σ0.2/≥ MPa: 1580 ~ 1790
Elonghation, δ ≥(％): -
Reduction of area, ф ≥ (％): -
Hardness | HB: HRC 46 ~ 50
Yield strength, σ0.2/≥ MPa: 1580 ~ 1790
Elonghation, δ ≥(％): -
Reduction of area, ф ≥ (％): -
Hardness | HB: HRC 46 ~ 50
Condition: aged
Tensile strength, σb/≥ MPa: 2280 ~ 2485
Yield strength, σ0.2/≥ MPa: 1550 ~ 1930
Elonghation, δ ≥(％): -
Reduction of area, ф ≥ (％): -
Hardness | HB: HRC 54 ~ 60
FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 10mm to 500mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Yield strength, σ0.2/≥ MPa: 1550 ~ 1930
Elonghation, δ ≥(％): -
Reduction of area, ф ≥ (％): -
Hardness | HB: HRC 54 ~ 60
FORMS AND SHAPES
Round bar (Diameter): 0.50mm to 800mm
Square bar / Flat bar: 10mm to 500mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers. - Email: lh.steel@hotmail.com
You also can reach our sales dept via E-mail: sales@ccsteels.com
Hot search：Arnavar
Previous page：Arnavar
Last page：Z6CNT18-10B
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1