NF Z10CNWT17-13B
2024-11-15 03:58:00 Origin： Remark：0 Click：
Material Specifications NF A35-578 - 1991 Warm worked Steel Z10CNWT17-13B Sheet, Plate, Round bar, ESR melting, Heat treatment, Cold worked.
TECHNICAL DATA SHEET - NF Z10CNWT17-13B
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Heat resistant Steel
Technical standards: NF A35-578 - 1991
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): 0.07 ~ 0.12
Silicon, Si (％): ≤ 0.75
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (％): 12.0 ~ 14.0
Molybdenum, Mo (%): -
Molybdenum, Mo (%): -
Tungsten, W (%): 2.50 ~ 4.00
Boron, B (%): 0.0015 ~ 0.0060
Titanium, Ti (%): 4 X (C + N ) ~ 0.60
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb ≥ MPa: 540 ~ 690
Yield strength, σ0.2 ≥ MPa: 245
Elongation, δ5 ≥ (％): 30.0
Yield strength, σ0.2 ≥ MPa: 245
Elongation, δ5 ≥ (％): 30.0
hardness / HBW: -
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment or normalizing + tempering.
PRODUCT PROFILE & DIMENSIONS
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment or normalizing + tempering.
PRODUCT PROFILE & DIMENSIONS
Round bar / disc (diameter): 5.5 to 600mm
Square bar / Flat bar: T6 to 400mm X W10 ~ 1200mm
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 3mm X W100 - 1000mm X Lmm
Square bar / Flat bar: T6 to 400mm X W10 ~ 1200mm
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 3mm X W100 - 1000mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers, E-mail: sales@ccsteels.com
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers, E-mail: sales@ccsteels.com
Hot search：NF Z10CNWT17-13B
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1