Z13C13
2017-06-29 10:49:01 Origin： Remark：0 Click：
Material technical specifications of NF A35-578 heat resistant steel Z13C13 Round bar, flat bar, plate and forgings Steelmaking, ESR melting, Hot forging/rolling, Heat treated, Technical specifications - NF A35-578 1991.
TECHNICAL SPECIFICATION & DATASHEET - NF Z13C13
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Heat resistant Steel
Technical standards: NF A35-578 - 1991
CHEMICAL COMPOSITION (mass weight %)
C (％): 0.10 ~ 0.15
Si (％): ≤ 0.75
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 12.0 ~ 13.5
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 12.0 ~ 13.5
Ni (％): -
Mo (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength,σb/≥ MPa: 450 ~ 650
Yield strength, σ0.2/≥ MPa: 250
Elongation, δ ≥(％): 15.0
Yield strength, σ0.2/≥ MPa: 250
Elongation, δ ≥(％): 15.0
hardness / HBW: 192
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE & DIMENSIONS
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE & DIMENSIONS
Round bar (Diameter): 5.50 to 600mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do EMAIL our qualified production engineers, sales@ccsteels.com.
If you meet further on any technical enquiry, you can do EMAIL our qualified production engineers, sales@ccsteels.com.
Hot search：Z13C13
Previous page：BioDur 316LS
Last page：STS7
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1