Z18CWN13
2017-07-03 09:57:11 Origin： Remark：0 Click：
Strip Coil Z18CWN13 Stocklist, Round bar Z18CWN13 Shaft, Z18CWN13 Forgings Ring Properties Steelmaking, ESRmelting, Hot blooming, UT, Hot forging, Hot rolling, Heat treated, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF A35-578 1991. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATION DATASHEET - NF Z18CWN13
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Heat resistant Steel
STOCK LIST & INVENTORY on Hand - Strip coil THK 0.7 X 200mm, Round bar Dia60mm
Technical standards - NF A35-578 - 1991
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.15 ~ 0.20
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
Ni (％): 1.80 ~ 2.20
Mo (%): ≤ 0.50
W (%): 2.50 ~ 3.50
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Heat resistant Steel
STOCK LIST & INVENTORY on Hand - Strip coil THK 0.7 X 200mm, Round bar Dia60mm
Technical standards - NF A35-578 - 1991
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.15 ~ 0.20
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
Ni (％): 1.80 ~ 2.20
Mo (%): ≤ 0.50
W (%): 2.50 ~ 3.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Heat treatment practice: QT Condition
Quenched 1000℃, oil / air cooled, and tempered 620℃ min.
Tensile strength,σb/≥ MPa: 960
Yield strength, σ0.2/≥ MPa: 760
Elongation, δ ≥(％): 15.0
Yield strength, σ0.2/≥ MPa: 760
Elongation, δ ≥(％): 15.0
hardness / HBS: 305 ~ 362
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered
AVAILABLE FORMS & DIMENSIONS
The alloy is usually produced by BEF / AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 to 600mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can reach or EMAIL our qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, you can reach or EMAIL our qualified production engineers, Email: sales@ccsteels.com
Hot search：Z18CWN13
Previous page：Z17CNS20-12
Last page：STS8
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1