Z20NCS33-16
2017-07-04 11:59:45 Origin： Remark：0 Click：
Material technical specification NF A35-578 heat resistant steel Z20NCS33-16 datasheet,Z20NCS33-16 Chemical compositions,Z20NCS33-16 mechanical properties from Steelmaking,ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF A35-578 1991. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL SPECIFICATION & DATASHEET - NF Z20NCS33-16
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Heat resistant Steel
Technical standards: NF A35-578 - 1991
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.20
Si (％): 1.00 ~ 2.00
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 14.0 ~ 17.0
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (％): 32.0 ~ 34.0
Mo (%): -
MECHANICAL PROPERTIES
Tensile strength,σb/≥ MPa: 550 ~ 800
Yield strength, σ0.2/≥ MPa: 230
Elongation, δ ≥(％): 30.0
Yield strength, σ0.2/≥ MPa: 230
Elongation, δ ≥(％): 30.0
hardness / HBS: 223
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
PRODUCT PROFILE
Round bar (Diameter): 0.50 to 600mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers, E-mail: lh.steel@hotmail.com
Reach to our sales department directly: sales@ccsteels.com
Hot search：Z20NCS33-16
Previous page：Carpenter 20Cb-3 Mod
Last page：STS4
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1