X45CrSi9-3
2017-07-07 10:35:01 Origin： Remark：0 Click：
Specifications X45CrSi9-3 data sheet, Stockholder X45CrSi9-3 Chemical, Z45CS9 properties from Steelmaking, ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF EN 10090 - 1998. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - NF X45CrSi9-3
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Valve Steel
Technical standards - NF EN 10090 - 1998
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.40 ~ 0.50
Si (％): 2.70 ~ 3.50
Mn (％): ≤ 0.60
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 8.00 ~ 10.0
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 8.00 ~ 10.0
Ni (％): ≤ 0.50
Mo (%): -
TYPICAL MECHANICAL PROPERTIES
Annealed temperature /℃: 780 ~ 820
Quenched temperature /℃: 1020 ~ 1070, air / oil
Tempered temperature /℃: 720 ~ 820
Tensile strength,σb/≥ MPa: 900 ~ 1100
Yield strength, σ0.2/≥ MPa: 700
Elongation, δ ≥(％): 14.0
Yield strength, σ0.2/≥ MPa: 700
Elongation, δ ≥(％): 14.0
Reduction of area, (%): 40
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
Ex-stock in hand
Wire rod: diameter 5.5mm / 6.0mm / 7.5mm / 8.5mm / 9.0mm
PRODUCT FORMS & DIMENSIONS
Round bar / wire rod (Diameter): 5.5 to 450mm
Square bar / Flat bar: T3.0 to 300mm X W3.0 ~ 200mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 300mm X L (or in coil form)
Square bar / Flat bar: T3.0 to 300mm X W3.0 ~ 200mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 300mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do EMAIL our qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, you can do EMAIL our qualified production engineers, Email: sales@ccsteels.com
Hot search：X45CrSi9-3
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1