Z40CSD10
2017-07-08 08:39:28 Origin： Remark：0 Click：
NF EN 10090 Valve steel Z40CSD10 Round bar, Z40CSD10 wire rod, Stock Available from Steelmaking, ESR melting, Turbine Steel Machinery.
TECHNICAL DATASHEET - Grade Z40CSD10
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Valve Steel
Technical standards: NF EN 10090 - 1998
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.35 ~ 0.45
Silicon, Si (％): 2.00 ~ 3.00
Manganese, Mn (％): ≤ 0.80
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 9.50 ~ 11.5
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 9.50 ~ 11.5
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (%): 0.80 ~ 1.30
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Annealed temperature /℃: 780 ~ 820
Quenched temperature /℃: 1020 ~ 1070, oil
Tempered temperature /℃: 720 ~ 820
Tensile strength, Rm ≥ MPa: 900 ~ 1100
Yield strength, Rp0.2 ≥ MPa: 700
Elongation, A5 ≥ (％): 14.0
Yield strength, Rp0.2 ≥ MPa: 700
Elongation, A5 ≥ (％): 14.0
Reduction of area, Z (%): 40
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE & DIMENSIONS
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
PRODUCT PROFILE & DIMENSIONS
Round bar (Diameter): 5.5 to 400mm
Square bar / Flat bar: T10 to 500mm X W10 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1200mm X L1000 - 5000mm.
Square bar / Flat bar: T10 to 500mm X W10 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1200mm X L1000 - 5000mm.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, reach to our sales department directly via E-mail: sales@ccsteels.com
If you meet further on any technical enquiry, reach to our sales department directly via E-mail: sales@ccsteels.com
Hot search：Z40CSD10
Previous page：X45CrSi9-3
Last page：AISI 685
Total list
Monthly rank
- 24X35CrMo17
- 23Z15CN17-03
- 23ASTM A565 Gr.616HT
- 21X10CrNiW17-13-3
- 19ASTM A638 Gr.660
- 18AISI 306
- 15SAE 51420
- 14P550
- 14SAE 51416
- 14X12CrMoWVNbN10-1-1